Control 50S/T


Surface-Mount Subwoofer for Subwoofer-Satellite- Loudspeaker System The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.
  • Full bandwidth 32 Hz – 20 kHz high fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Available in black or white

Thông tin bổ sung

Trọng lượng 9.0 kg
Kích thước 356 x 391 x 203 mm
Frequency Range (-10 dB)

32 Hz – 200 Hz

Frequency Response (±3 dB)

50 Hz – 150 Hz

Power Capacity

300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)

Nominal Sensitivity (2.83V, 1m)

95 dB (near corner), 89 dB (center of wall)

Rated Maximum SPL (1m)

115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)

Nominal Impedance

8 ohms (in bypass/thru mode)

Transducer Driver

200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former

Input Connectors

Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)

Material

Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.

Included Accessories

Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Optional Accessories

MTC-PC2 terminal panel cover
MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm heavy duty
speaker stand
MTC-CBT-FM2 flush-mount low-profile wall-mount bracket